Duckdns letsencrypt docker

GitHub is home to over 50 million developers working together to host and review code, manage projects, and build software together. Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community. Already on GitHub? Sign in to your account. I have been thinking about this for a while.

I do agree that duckdns would be a pretty good free dns provider to support, however the amount of work it would require is not trivial. To implement duckdns there is no plugin for it we would have to essentially create a plugin for it or put in all the additional logic with getting the key from acme, update on duckdns, and let acme know it's up, etc. In the meantime, I continue to recommend cloudflare as the ideal free dns provider for certbot validation service is free but one still needs to pay for a domain name.

Given it is just a Curl endpoint you can use a custom hook for renewal requests IE I use this for my txt api endpoint:. Did a quick test on this. It's one or the other. Will look into it more. Something looks wrong, though. With manual dns validation with acme requires you to enter both the wildcard and the base url as parameters, and certbot prints the following:. I'm really confused about how one is supposed to get a cert via manual plugin to cover both wildcard subdomains and the main domain.

Well, whaddya know. The manual method is buggy, but if you use the auth hook, it does the validation of the two domains separately, with the txt setting steps in between, so it works. Well, the auth hook also sets the txt records first, and then validates them altogether, which doesn't work with duckdns because it only allows one txt record per domain, and the second one overwrites the first.

Skip to content. Dismiss Join GitHub today GitHub is home to over 50 million developers working together to host and review code, manage projects, and build software together. Sign up. New issue. Jump to bottom. Copy link Quote reply.

The process is below: Request the wildcard cert:. Member Author. With manual dns validation with acme requires you to enter both the wildcard and the base url as parameters, and certbot prints the following: Performing the following challenges: dns challenge for xxx. I'll go ahead and add wildcard duckdns certs in a bit. Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment. Linked pull requests.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window.It also contains fail2ban for intrusion prevention. Our images support multiple architectures such as xarm64 and armhf. We utilise the docker manifest for multi-platform awareness. More information is available from docker here and our announcement here.

The architectures supported by this image are:. Here are some example snippets to help you get started creating a container from this image. Compatible with docker-compose v2 schemas. Docker images are configured using parameters passed at runtime such as those above. For example, -p would expose port 80 from inside the container to be accessible from the host's IP on port outside the container. Https port. Top url you have control over customdomain. Subdomains you'd like the cert to cover comma separated, no spaces ie.

For a wildcard cert, set this exactly to wildcard wildcard cert is available via dns and duckdns validation only. Options are aliyuncloudflarecloudxnscpaneldigitaloceandnsimplednsmadeeasydomeneshopgandigoogleinwxlinodeluadnsnsoneovhrfcroute53 and transip. Optionally override in seconds the default propagation time for the dns plugins.

Optional e-mail address used for cert expiration notifications. If you wish to get certs only for certain subdomains, but not the main domain main domain may be hosted on another machine and cannot be validatedset this to true. Additional fully qualified domain names comma separated, no spaces ie. Set to true to retrieve certs in staging mode. Rate limits will be much higher, but the resulting cert will not pass the browser's security test. Only to be used for testing purposes.

All the config files including the webroot reside here. As an example:. Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add.

duckdns letsencrypt docker

Please read up here before asking for support. Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.

For http validation, port 80 on the internet side of the router should be forwarded to this container's port Cloudflare provides free accounts for managing dns and is very easy to use with this image. Due to a limitation of duckdns, the resulting cert will only cover either main subdomain ie.

How to Install NextCloud on OpenMediVault 5 with Remote Access and SSL

You can use our duckdns image to update your IP on duckdns. If you need a dynamic dns provider, you can use the free provider duckdns. Certs are checked nightly and if expiration is within 30 days, renewal is attempted. It is recommended to input your e-mail in docker parameters so you receive expiration notices from letsencrypt in those circumstances. Security and password protection.Use Let's Encrypt staging server with the caServer configuration option when experimenting to avoid hitting this limit too fast.

Traefik requires you to define "Certificate Resolvers" in the static configurationwhich are responsible for retrieving certificates from an ACME server.

duckdns letsencrypt docker

Then, each "router" is configured to enable TLS, and is associated to a certificate resolver through the tls. Certificates are requested for domain names retrieved from the router's dynamic configuration. Defining a certificates resolver does not result in all routers automatically using it. Each router that is supposed to use the resolver must reference it. There are many available options for ACME. For a quick glance at what's possible, browse the configuration reference:. Certificate resolvers request certificates for a set of the domain names inferred from routers, with the following logic:.

If the router has a tls. If no tls. Please note that multiple Host matchers can be used for specifying multiple domain names for this router. When multiple domain names are inferred from a given router, only one certificate is requested with the first domain name as the main domain, and the other domains as "SANs" Subject Alternative Name. Please check the configuration examples below for more details. If there are less than 30 days remaining before the certificate expires, Traefik will attempt to renew it automatically.

Certificates that are no longer used may still be renewed, as Traefik does not currently check if the certificate is being used before renewing. When using LetsEncrypt with kubernetes, there are some known caveats with both the ingress and crd providers. If you intend to run multiple instances of Traefik with LetsEncrypt, please ensure you read the sections on those provider pages.

Do not hesitate to complete it. You can delay this operation by specifying a delay in seconds with delayBeforeCheck value must be greater than zero. This option is useful when internal networks block external DNS queries.

ACME V2 supports wildcard certificates. As described in Let's Encrypt's post wildcard certificates can only be generated through a DNS challenge.

For new sub domains which need Let's Encrypt authentication, the default Traefik certificate will be used until Traefik is restarted. Uncomment the line to use Let's Encrypt's staging server, leave commented to go to prod. Optional but recommended [certificatesResolvers.By FmaJanuary 26, in Docker Containers.

Hi, i recently asked on the unRAID reddit what people wanted guides for, this was the top answer. I'm not qualified to verify the info, but it sure looks good! Very nice work! Hope to see more! I've added it to the Docker section of Guides and Videos. Hadn't quite managed to get Nextcloud working couple weeks ago when tried, ran through your instructions and was up and running very quickly.

I cant wait to try this when I get home!!!!! I have been struggling with this for months - sometimes I would make a small step forward, but have only gotten couch potato and sonarr working. Way excited!!

I understand having secure remote access is the reason to do this but, silly question, what are the downsides to doing so? Regarding downsides Want any other guides? I completely understand the concept and appeal to be able to securely access your services remotely, but how would this impact local use? If some of the apps like sonarr, for instance require changing the URL base, would that just mean I'd have to change the way I locally access sonarr on my network e.

Most routers allow access the same as remotely can't think what it's called, something to do with loopback therefore you can just access it at xxx. Most routers allow access the same as remotely can't think what it's called, something to do with loopback. NAT Reflection, loopback, hairpinning, depending on vendor. Not all routers expose the setting, some have it on by default, some have it off by default.

Or you can add it to your router's dnsmasq. Thanks, all, for clarifying. Last question hopefully--I installed the letsencrypt container, exposed appropriate ports, got the certs for my domain and subdomain Does the http not matter since the whole point is we're using https now?

Just want to make sure this is by design before I continue on Edit: Nevermind. I went ahead and set it up even though I can't access port 80 actually 81 internally. As long as I reference https locally, I can access all the server apps.

Forcing 80 to redirect externally. Thanks again for the writeup! I'm trying to figure out how to reverse proxy my rutorrent docker.I try to setup letsencrypt in my OMV installation. I followed step by step this video Installation and Setup Videos - Beginning, Intermediate and Advanced OMV, phpmyadmin, duckdns, mariadb, nextcloud everything is up and runnig.

But when i hit the Save button on the end of the docker configuration, i get this error:. See 'docker run --help'. The guide is outdated. Remove the --network my-net. Then attach the container manually to the my-net network in the network tab of the docker gui. Ok my next problem is when i type in Putty "docker logs -f letsencrypt" i got this error at the end. ContextualVersionConflict: cryptography 2.

Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container.

I would if i knew where to look after the log. I found the fix in linuxserver forum. I hope i get this right. So i open Putty Login as root and type in first: apk add gcc musl-dev libffi-dev openssl-dev python3-dev; pip install cryptography --upgrade ant then i can type docker logs -f letsencrypt?

Cause right now you are trying to register a ssl-certficate for the domain duckdns. The bug was fixed in the latest version of the image. So just download the latest version and it will be fixed. Ok deleted the old one. And now i have installed the new version of letsencrypt Docker.

Does the error say that there is something wrong with duckdns? Usually the reason are faulty port forwardings. Double check them. If this is not the case we have to dig deeper. Now it is working. The Problem was like you wrote faulty port forwarding. The interface of my Telekom Router is just crap and misleading.

Thank you for the help. Same with Unitymedia. Time to switch to FritzBox.

duckdns letsencrypt docker

Hello Again!The goal of this guide is to give you ideas on what can be accomplished with the LinuxServer letsencrypt docker image and to get you started. We will explain some of the basic concepts and limitations, and then we'll provide you with common examples. Feel free to check out the original guide published on our blogbut keep in mind that there have been many improvements made to the image since that article. SSL certs allow users of a service to communicate via encrypted data transmitted up and down.

Third party trusted certs also allow users to make sure that the remote service they are connecting to is really who they say they are and not someone else in the middle. When we run a web server for reasons like hosting websites or reverse proxying services on our own domain, we need to set it up with third party trusted ssl certs so client browsers trust it and communicate with it securely. When you connect to a website with a trusted cert, most browsers show a padlock icon next to the address bar to indicate that.

Without a trusted cert ie. In the past, the common way to get a trusted ssl cert was to contact one of the providers, send them the relevant info to prove ownership of a domain and pay for the service. Nowadays, with Let's Encryptone can get free certs via automated means. The letsencrypt docker imagepublished and maintained by LinuxServer. It is essentially an nginx webserver with php7, fail2ban intrusion prevention and letsencrypt authentication built-in.

It is just mysql short of a LEMP stack and therefore is best paired with our mariadb docker image. Here's a list of all the settings available including the optional ones. It is safe to remove unnecessary parameters for different scenarios. The validation is performed when the container is started for the first time. Nginx won't be up until ssl certs are successfully generated. The certs are valid for 90 days. The container will check the cert expiration status every night and if they are to expire within 30 days, it will attempt to auto-renew.

However, you don't necessarily need to have it listen on port on the host server.

Setup HASS with LetsEncrypt and DuckDNS!!

All that is needed is to have port on the router wan somehow forward to port inside the container, while it can go through a different port on the host. Port 80 forwarding is required for http validation only.

Same rule as above applies, and it's OK to go from 80 on the router to 81 on the host, mapped to 80 in the container. Letsencrypt container happily runs with bridge networking. However, the default bridge network in docker does not allow containers to connect each other via container names used as dns hostnames. Therefore, it is recommended to first create a user defined bridge network and attach the containers to that network.

If you are using docker-compose, and your services are on the same yaml, you do not need to do this, because docker-compose automatically creates a user defined bridge network and attaches each container to it as long as no other networking option is defined in their config. For the below examples, we will use a network named lsio. We can create it via docker network create lsio. Keep in mind that dns hostnames are meant to be case-insensitive, however container names are case-sensitive.

For container names to be used as dns hostnames in nginx, they should be all lowercase as nginx will convert them to all lowercase before trying to resolve. Let's assume our domain name is linuxserver-test. On the router, forward ports 80 and to your host server.

On your dns provider if using your own domaincreate an A record for the main domain and point it to your server IP wan. With docker cli, we'll first create a user defined bridge network if we haven't already docker network create lsioand then create the container:.Be sure to read all the way through this blog post as it will explain the process as we go along.

Because NextCloud will need to run on port 80, we need to change the port that OpenMediaVault runs on. Login as root. Press return and you should get a pretty blank screen. Copy and paste the following into the empty screen:. The code above will do a number of things. After that, it will setup a mariadb container to store your data. Last, it will download and install the official NextCloud setup.

The first thing to change is in the database area. Be sure to include the full URL yourdomain. Be sure to press Y to say Yes, you want to save.

Troubleshooting Letsencrypt Image Port Mapping and Forwarding

This may take a couple of minutes depending on your server hardware setup and your internet connection speed. This will fix some https issues and allow us to successfully connect our desktop and mobile apps to the server.

Add this to the end of the file:. You should, again, find multiple php. You should, again, find multiple. These changes MAY get overwritten on NextCloud version updates so make note of these for future reference.

Installing Apps At this point, everything should be working as intended. You should be able to download, install, and setup your desktop and mobile apps. Original Instructions found here. Each part is in here for a reason. OMV needs to be on any port other than Getting started Because NextCloud will need to run on port 80, we need to change the port that OpenMediaVault runs on.

Thanks to Gaurav Bafana for sharing this solution in the comments section on this YouTube video. Installing NextCloud First things first, type in an admin username and password. You should see a console window. HTTPS Fix This will fix some https issues and allow us to successfully connect our desktop and mobile apps to the server. Login to your server as root using Putty.

Change PHP. Like this: Like Loading Not like it changes anything, but we are obligated to inform you that we are using cookies well, we just did.

duckdns letsencrypt docker

Necessary Always Enabled.